Differential Sticking Tester

API Recommended Practice 13B-1, ANSI/ API 13B-1/ ISO 10414-1, API Recommended Practice 13B-2, & API Specification 13A The Differential Sticking Tester was designed to determine how likely a given drilling fluid will be to produce a " stuck pipe" situation and how effective a given drilling fluid treatment or application of spotting fluid in any given drilling fluid would be in reducing this tendency. This measurement is called the " Stuck Tendency Coefficient" . It takes into account both the stickiness and the cake building capability of the drilling fluid. The " Stuck Tendency Coefficient" is determined by the Timed Filtrate Test. The unit can be pressurized by the CO2 regulator assembly or from any nitrogen source. If Nitrogen is to be used, the Differential Sticking Tester must be fitted with a suitable Nitrogen regulator, gauges, relief valve, hose and fittings. The standard test uses 477.5 psig ( 3292 kPa) differential pressure applied to a stainless steel vessel of approximately 140 ml capacity. The measurement can be made using either the flat-faced torque plate or the 12-1/ 2" ( 31.75 cm) spherical radius plate which approximates pipe in casing or collars in borehole contact geometry. ( Both are provided) In the event of a " sticky" sample that tends to adhere more to the torque plate than to the filter paper, stainless steel micro-corrugation disks are provided, to help ensure success of the test. Specification: - Capacity: 140 ml cell - Dimensions: 13.5” x 7.5” x 6.25” - Weight: 12 kg - Pressure: 477 psig